March 10, 2015

Making LED Grow Lights


I want to grow leeks and alpine strawberries this year, and would like to try tomatoes and a few other things from seeds rather than seedlings. The only convenient place to start seeds at my house would be the basement. It is dank and dim, so some grow lights were in order.



To begin, I cleaned off a shelf and got some flat trays, lids, and seedling warming mats. I could possibly fit four flats on the shelf, but I started off with two.

There are plenty of nice looking LED grow lights on the internet, but the good ones are pretty expensive (like several hundred $ each). Some of the cheaper ones had low light output or were the wrong form factor for the shelf I had available.

I think these expensive LED lights are mainly targeted at the pot growing market, so people can justify shelling out some serious cash for equipment. People starting veggies inside mostly use flourescent tube fixtures. But this is 2015 and the LED lighting revolution is in progress, so I felt like I ought to take advantage of that. And for lights that will be on 14 hours a day, the energy saving aspect of LED was appealing.

Unlike the commercially made LED grow lights, LED strip is amazingly cheap these days on a lumens/$ basis. One could hack something together with scraps and so on to run LED strip, but I wanted these lights to be useful as general purpose fixtures when they are not in service for seed starting. I really like high CRI lighting, like halogens. At work I built some electronics work benches and put high CRI T5 high output tube fixtures on them, fitted up with high CRI bulbs. These are pleasant to work under.

So I ordered a 5 meter reel of "high CRI" white LEDs from ebay. Coming from China, they took a few weeks to arrive.


A number of times through this project I found myself thinking "really? did I really need to make my own lights?? Get a grip!". But what's done is done. I tell myself it was educational for the kids. And that 23 cents of electricity I'll save for the year when compared with fluorescent tubes.


Mechanical
I had in mind to mount the strip inside an aluminum channel which could also accommodate the drivers, a switch, and a diffuser/cover. The strip actually generates a fair bit of heat (input power is ~40W per fixture), which the aluminum helps to dissipate. Not finding a ready-to-use extrusion readily available, I ordered rectangle tube from OnlineMetals, chopped to length


then cut the top off (leaving a flange for screwing down the lid).


The bandsaw and a file served to make some mounting wings on the end of each channel.



Acrylic scraps from work made up the covers and end pieces.



I did this machine work in about half hour chunks during the occasional lunch break at work over a period of a couple weeks.

The flanges were tapped for M3 screws. The tap I used was munged so it ruined a few holes before I realized it, which I had to go back and helicoil to fix.


After getting all the screws in to hold the channels, covers, and endpieces together, I orbital sanded the lot, then hand finished with a nonwoven abrasive pad. I also added holes in the sides for electrical features.



Electrical
The channels were selected to hold two Meanwell LPC-20-700 20W drivers I got for $10 each on ebay. In reality, the fit was a bit tight, so I sanded the sides of the drivers slightly to make them fit.


Each is held down with a pair of M4 screws.


AC power comes in through a 120V plug


through a plastic cord grip


and into the enclosure


to a toggle switch, then the drivers


neutral went from the service cord to a wire nut, then to the two drivers.


I had to do a little thinking about how to set up the circuit on the output side. Putting three lines of LED strip in the channel would provide about the right load for the two 20W drivers.


But the strip was 12V and the driver output 24V. So I divided the middle of the three strips in two and attached each half to an adjacent full strip, such that I had two sections of strip, each 1.5 lengths. These two sections could then go in series to allow them to run from the 24V drivers. Of course things would be easier if I had 24V strip and two 12V drivers, but this is what was cheap and available on ebay that fit my desired specs.


How to combine the outputs of the drivers? These guys had output voltage to spare, and I expected them to run out of current before running out of voltage. So I just put a 1A diode in series with the positive output of each driver, then wired them together at the input to the strips.


One issue I ran into was that soldering wires to the strips seemed to sometimes burn through the adhesive on the back of the strip and make contact to the aluminum channel. Or maybe the minus side of the strip is supposed to contact the substrate. In any case, the two strip sections worked fine when run separately, but shorted out the two were put in series. The solution was to put kapton tape strips under the places where wires were soldered on. The kids were impressed with the kapton tape because it was colored "golden".


Child 1 and Child 2 were happy to get a chance to do some more soldering, which they are always up for.


The covers were installed


and we were ready to go



Grow Center
These lights are pretty bright (about 3000 lumens per fixture), though I'm not sure the CRI rating is entirely reliable since the quality of the light seems yuckier than other high CRI lighting I've experienced. A 500W halogen worklight puts out about 10k lumens, for comparison. I'm not trying to grow actual big plants inside, I just want to make seedlings for transplanting.

The lights were mounted to the shelves, and I set up the warming mats with my all purpose temp controller box and a thermocouples for feedback.


I set the controllers for 22C, though mostly the warming mats are not quite able to acheive that. So probably I didn't really need the controller. One of the controllers didn't seem to actually work either. I did dig these out of the trash, so that could explain such a condition. Likely the output relay is blown; it is only rated for 3A. So both mats are attached to the output of one controller, with one thermocouple for feedback.


An appliance timer was used to switch both the lights and the heat mats.



Seeding
We have a garden store nearby which specializes in hydroponic and indoor gardening (i.e. marijuana). While I don't grow that particular crop, it is a useful resource. I stopped in one day on the way home from work to buy coarse vermiculite, worm castings, and compressed cocoa fiber.


Child 3 and I rehydrated a brick of cocoa fiber


I decided to put in a little EM-1 microbe mix. Mostly the advice is to use sterile medium for seed starting. But I thought if any microbes are going to get in there, the best thing might be to pre-colonize the medium with beneficial bugs instead of waiting for pernicious ones to show up. I think we put a capful of EM-1 into the hydration water. No idea if that was a good or bad move, or if will make no difference.


Dang that cocoa fiber really expands. Must have blown up by about 7x!.


We mixed 1/3 each of cocoa fiber, vermiculite, and castings.




Child 1 and Child 3 were all over mixing by hand.


We added some water until it seemed well hydrated but not wet, then distributed to a 36 cell pack which I bought from Johnny's.


Then we sprinkled on seeds from Alexandria, Mignonette, and Yellow Wonder alpine strawberries, all from Annie's.


and barely scuffled the potting mix about the seeds.


We made sure the seed and upper part of the soil was moist.


We also made up a 36 cell tray with King Richard and Megaton leek seeds, from Fedco. Then we put the covers on and put them on the warming mats under the lights.


The seeds were started on Valentine's Day (2/14/2015). A little less than a month later, the leeks are doing fine. I've thinned them once already but should do so again I suppose.


And the strawberries are all germinated excepting one cell.




March 3, 2015

Felt Legion Cap


One day last fall, I could not find my felt gnome hat I made a few years ago. With cold weather closing in and no silly looking home made felt hat to wear, I urgently set to work to make a replacement. 


I like the angular lines and short brims of some military uniform style caps from 50-100 years ago. My plaster head cast was brought out for a bout of millinery, and I pulled a cheerios box from the recycling to cut up for a pattern. Child 2 and I messed around with the pattern for a while. We started with this:


Then I cut some slits in from the top and overlapped the cuts, to create a lightly tapered abbreviated cylinder.


This got trimmed at the top and bottom. Traced around the top to get a top piece, then traced around for the beginning of a brim.


Child 2 wanted to try it out at every stage.


After fooling with the cardboard and blue tape for a while, I had something that looked good enough for a first draft. 


I cut the paper mock up apart with scissors and an xacto. The brim was designed not as a perfect match to the oval shape of the cap edge. Instead, it was drafted to spread out a bit more such that when it was joined to the cap it would be given a light curve and downward slope. At least that was the idea.


Here is a photo of the pattern on my fabric cutting mat which has squares in the quaint old-fashioned units of inches (1 per square). The bottom edge of the cap part measures 56.5cm in length laying the tape along it's curve, while my actual head measures 56cm with a tape.


I did a quick sketch in Inkscape of something close to the pattern, bitmap shown below. If you want the PDF or SVG files, they are on my google drive for download. You could try measuring the circumference of your head, adding 1cm or so, then scaling the vector drawing up or down and printing it out on multiple sheets of paper. Or you could just draft a paper pattern using measurements and a square.

Remembering my experience with my last hat, I cut enough gray wool blend felt for two layers to make the new hat. I wanted it to be somewhat stiff and hold its edges so I also cut a layer of nonwoven sew-in interfacing to go between the two layers of felt. The interfacing was cut to not extend all the way to the seams, in order to make the corners and edges less bulky. The brim was made with the same construction. I now wish the brim was stiffer; perhaps next time I'll find a stiffer material to use for the interfacing in the brim. 


The treadle machine was used to laminate the interfacing layer to the inner felt pieces. 


Then I started sewing up two copies of the hat by hand. There isn't that much seam to sew, and the dexterity of hand sewing was useful for putting things together. 

I started by sewing the top oval piece to the strip which forms the main part of the cap, then joining the edges of the main part at the center back. I quickly found the hat was going to be too tight. Maybe my head mold shrunk during the curing of the plaster? Maybe because I used two layers, or I needed more than 5mm wearing ease? Becky says she has little doubt my head has gotten fatter in the fourteen years or so since I made that plaster cast. In any case, I cut a triangular wedge to patch in to the center back seam on both layers, bigger on the outer layer.


Of course the outer layer needed to be a little longer than the inner layer, which I didn't account for in cutting the pieces, figuring I could stretch and shrink the two layers with steam to match. That became impossible on the inner layer once I stitched on the interfacing. 

After finishing the cap section, I stitched on the brim.


Once the I had two caps, I put them together, did a little trimming with embroidery scissors to get the edges matched, 


then sewed around the lower edge and steam pressed to make one hat.


One of my favorite things about my old hat was the big red felt flower on the side. I recreated one to put on this hat, originally intending it to go in the front center of the cap section. But once I could try it on and experiment with placement of the flower, I found I preferred it to be offset on one side. 



This hat is pretty great. Comfortable and reasonably warm, for a bald guy. I wore it to California this last December to attend my sister Annesly's wedding. 


 I received several compliments on it during the trip. I'm used to a certain percentage of people in public giving me a double take when wearing my wood shoes or my gnome hat. This was also the case on this trip, but the quality of the looks seemed subtly different, like "that guy looks weird. But good" rather than just "that guys looks weird." Naturally I was also rocking my homemade high waisted wool pants, suspenders, and white shirt.

Last two pictures courtesy of Mary Gates.

I'd like to experiment with some 100% wool felt in a single, thicker layer. Might be less work to make the hat instead of dealing with three layers.

Here I am wearing the hat at the chinese new year's party put on by the chinese school the girls and I attend on Sunday afternoons. The kids are doing a game which my class organized where you can eat however many M&Ms as you can transfer to a cup in 30 seconds with chopsticks.

Photo courtesy Jean Newman

As you can see, anytime I need to appear in public and look nice, its either my home made black formal suit or the wool pants outfit. The only other clothes I still have that I can wear out of the house are four worksuits which are getting increasingly worn out.

Just the other week, my old hat turned up. It had been stuffed in the crack of a chair cushion in the living room. That's ok though, now I have two silly looking homemade felt hats!

I think almost anyone could manage to make a hat like this. Depending on your skills, it might take a few drafts and some time, but it is quite straightforward. Developing the pattern with paper and tape is a good method; you can just work on your own head with a mirror if you don't happen to have a plaster copy of your anatomy around.

February 21, 2015

Urban Micro Orchard: Year 1



The narrow strip of bed was planned and built, covering about 15 square meters of bed area, or roughly equivalent to the area covered by one mature semi-dwarf apple tree. The back fence was put up, and the seven apple trees and a bunch of companions were planted.




Companions
Many sources recommend letting the apples get established first, then phasing in companion plants. But I decided to just let loose with the companions, which were selected not to be too tall anyway, and with such a small area I thought we could keep things under control as far as invasive spreading goes.


Edible Greens
  • Italian Dandelion (Chicory) - These did extremely well grown from seed (Johnny's), and we ate a bunch of them. Becky cooked and froze a whole lot more, and I could have cut a basketful at the end of the season but I didn't to it and the greens were decimated by frost. I wish I liked them more, but they are bitter and the larger leaves are on the stringy side. I'm a little concerned about keeping them under control next season, assuming they come back. Probably they will want to bolt badly and grow tall flower/seed stalks, unlike their profuse but leafy and low habit this year.
  • Salad Burnet - Developed into a thick, low bush by the end of the season, with nice looking foliage. Unfortunately I don't think it is much good to eat. The leaves are ok, but they are small and tedious to remove in bulk from the stems, which are on the tough side.
  • Sylvetta (wild arugula, hopefully perennial)- Grew in nicely. I love the Wasabi variety; it really tastes like wasabi! Unfortunately it was smothered by the olive leaf and sylvetta types planted next to it. These provided plenty of spicy accents for salad and pizza. The stems are too tough to eat, and it takes some time to pick any volume of leaves.
  • Sorrel - Two transplants from Food Forest Farm got off to a slow start but seem to be doing ok.

Herbs
  • Sage - made quite a showing, grown from seed. Should have enough for culinary use from now on. Time to grind up some new pork & sage breakfast sausage!
  • Madeline Hill Rosemary - grew well during the season, have to find out if it is really zone 6 hardy. I layered in a bunch of hay around and on top of it for some insulation. We had -20C (subzero F) temps before any snow was on the ground this winter, which will be a real test of hardiness.
  • Oregano - seeds came up but stayed small, now making a kind of puddle of oregano plants
  • Winter Savory - about like the Oregano; not crazy about the flavor
  • Chamomile - making a low green puddle like the Oregano. Suppose I should thin this stuff out.

Alliums
  • Egyptian Onions - these did very well, and I cut some of them off a few times for green onions. Looking forward to their performance in the coming year. One or two even made a few topsets.
  • Green Onions - Transplants from nurseries did well, seeded ones grew very slowly; we'll see if they survive winter.
  • Garlic Chives - Transplants did well, seeds struggled. I was not in love with the eating experience; texture too tough maybe? I think I'll move some of our regular chives there between the transplants, instead of encouraging all garlic chives in that area.
  • Perennial Leeks - Southern Exposure had issues with their crop, so they sent me a refund check instead of bulbs. Try again next year, in the meantime we put some potato onions from SE in the spot reserved for the leeks.
  • Mystery Allium - Planted some topsets which I which I snuck from a robust allium in the front of Red Fire Farm when we visited in June for strawberries and peas. The lady working the farm store said she thought they were "Crawling Garlic". Maybe it is Elephant Garlic? I've not grown it so not sure what it looks like. The leaves of this plant were huge, dark green, with round cross section. The topsets were pretty large, and took off quickly when I planted them in the fall.


Aromatics
  • Rue - I can't imagine eating this stuff; it smells weird. Here is Child 2 planting some from the nursery.
  • Artemesia - silver mound; did well. The kids love how fluffy and soft it is early in the season, and like it's smell when crushed.
  • Dwarf Tansy - Got two of these from Oikos, which arrived very small and bedraggled looking. They died almost immediately, even though I planted them the same day they got here. Oikos sent me a replacement, but the new ones promptly died too. In general I was not that impressed with what I got from Oikos; super small and unhealthy looking plants. Too bad because they have a great selection of interesting and unusual items, and seem to have a good reputation. Maybe the plants were in the mail too long, or it could be my lack of skill as a gardener.

Flowers
  • Oriental Poppy - None of my seeds came up as far as I can tell, so I planted two from the nursery. One died; have to replace it next year with another.
  • Baloon Flower - cool looking flowers; started noticing this all over the city once I knew what to look for.
  • Columbine - Not crazy about the way the plant looks, probably will replace it.
  • Calendula - I love this plant. So easy to grow, a profusion of cheery colored blooms cycling through until frost, and some benefits to nearby plants. If I got my act together more I could collect flowers for fabric dye. Self seeds readily too, but the seedlings are not too hard to pull out where they are not wanted. I read that the greens were edible, so one time I collected a pile of mammoth red clover and calendula greens, which together were tough and bitter. Here is the center panel of the orchard design, after it's sunflower was taken out. Still left in there are some of the Christmas Limas that were growing up the sunflower which I tried to relocated to the trellis, calendula, and tiny Nasturtiums which never got anywhere. On the right are the dandelion greens, to the far left is salad burnet. A little red clover visible by the calendula.
  • Nasturtium - Tried to grow it from seed, and it did come right up but then languished and never grew bigger than my hand. Guess I'll go back to transplants from the nursery next year, which I've grown a few times without issues.
  • Irises - put in four from Schreiner's, pretty sure one of the Siberians died. 
  • Bulbs - added tulips and muscari to a few spots in the fall

Sunflowers
I read somewhere about planting a sunflower due south of baby apple trees in their first year, to help shade them during the hottest part of the day. This sounded good, so I planted Hopi Black Dye sunflower. I'd love to harvest seeds from these plants, to make fabric dye and cooking oil. That did not go so well this year, but the plants were neat looking, made tons of pretty flowers, and gave the beans something to climb up.

These started more slowly than the hybrid sunflowers I planted elsewhere in the yard; two are just visible in the lower right of the next pic.


but they just kept going


 and going.


and going!


We planted beans next to each sunflower, some of which did well. I think the shade from the huge leaves of the sunflower impacted the beans. Next time I might trim off lower leaves earlier in the season to let more sun in to the beans.

I've seen on a number of companion plant charts that sunflowers and beans are antagonistic, so that may be playing a role in suppressing the beans. But sunflowers look great, and make a wonderful tall pole for beans to climb up, so it is very tempting to use them together. I think the most productive bean varieties were Gita, a green colored yard long type from Johnny's, and either Cherokee Trail of Tears or Black Turtle (something with black beans in pods).


These sunflowers grew way too big for their intended purpose, but they were so cool looking I couldn't bear to take them out. Consequently, they cast a lot of shade on the apple trees. I could claim that was my way of limiting their vegetative growth so they could settle in and get more firmly established in their first year. Yeah, that's it.

The sunflowers also limited air circulation around the apple trees, and made them hard to see so I missed out on some things that would have been good to notice, like pruning and grafting touches that would have been beneficial. Ah well, live and learn. I'm looking forward to growing this variety of sunflower in other locations in 2015; hopefully it will be as successful and I'll be able to harvest significant amounts of seed.


Challenges
Aphids
First thing to present itself was a plague of greenish aphids with ants minding them feasting on the underside of new growth on the apple trees in early spring. I bought a squirt bottle of neem at the garden store and gave them a good dose, which knocked them back. The ants started bringing new aphids in, but I think by then the predator bugs had ramped up so they didn't get too bad.

Missing Branches
On some trees, no buds elected to form and grow in the area where the espalier design would have a branch. It is very frustrating how the trees are not growing like I drew them on the computer! Maybe they somehow missed reading up on my blog post on the espalier design. Helping them to get there is my job I suppose, however bumbling I may be at this point, since they won't do it if left to their own devices. On the central tree to the design, the Wickson, there is a little growth that I may be able to turn around to become the leftwards angle lowest rung, but I decided to try to bud graft exactly where I wanted that rung.

This was done in early august after watching some internet videos. I went with the chip method instead of slipping the bud into the cambium of a slit in the bark because it looked less fiddly.


If it takes, I'll cut off the less well placed one. If not, I'll continue trying to coax the other one into shape.


I somehow failed to notice a glaring lack of growth on the righthand lowest rung on the Ashmead's Kernel. I blame the fact that the tree was hidden by an enormous sunflower for a few months. A chip graft was unfortunately not applied to that location, so this spring I'll try putting a little notch in the bark above a bud or twig in that area, hopefully invigorating growth just below the notch. I'll try putting the notch in above the chip graft on the Wickson too.


Extra Branches
After the initial pruning, I did pinch a couple little growths (and the flowers, after petal fall). But I wasn't sure I should keep harassing the trees through the season. I guess I should have done so; the extra pruning might have invigorated some bud action to help with the missing branches issue. Once the sunflowers got going, it was hard to see the apple trees, so easy to miss branches that would have been better off getting snipped. Oh well, I'll take them out with this year's dormant pruning.


Cedar apple rust
I noticed some tiny yellow spots on some of the leaves early in the season. These grew, and eventually started sprouting horns on the bottom of the leaf.


Ah, my first real apple disease! After some research, it looked like cedar apple rust, which I had never heard of before. It was not bad enough to defoliate the trees, but it was quite widespread on some of them. I think the worst hit were Wickson and Gold Rush, with some of the others suffering more mildly. I recall the best off was Ashmead's Kernel. If only I had kept better notes, which is a goal for 2015.


This disease is fungal and has an interesting life cycle. It lives on apple leaves during the growing season, but does not overwinter there. Instead it sporulates and infects a tree in the juniper family. On the junipers, it forms bizarre galls like spiky, slimy christmas ornaments in the spring and sends out spores to infect newly grown apple leaves (image below from the Wikipedia entry on CAR).


I'd like to strive to not spray poison on the plants and soil I'm trying to use to grow food. I figure I can tolerate non-perfect fruit and extra effort more than a market grower. Still, this leaves only a couple options for control of this disease. Once the fungus is in the tree, there is not much to be done for that year, so all treatments focus on the early spring period when spores do their infecting. On the plus side, the tree must get newly infected every spring, so every year is a fresh chance to try a new strategy.

I own a copy of The Holistic Orchard by Michael Philips, and am impressed by his ability to grow apples organically on a commercial basis. He recommends focusing on developing healthy plants and soil, such that the trees can better resist pest and disease pressure. This is accomplished partly by having deep experience with apples, the local microclimate, what different issues look like, and boundless intuition about what the trees need at any particular time. Maybe someday I'll have that, but for now I'm a clueless amateur.


One of the important tools in Michael Philips' routine is his holistic orchard spray, which has neem, kelp, effective microbes, and other components. The neem can act as a fungicide, but it is also an insecticide so can't really be applied while the blossoms are open, which unfortunately coincides with the rust infection window. You don't want to mess with the bees coming to pollinate the apples, right? So Philips says to spray the holistic brew at 6mm green, early pink, petal fall, and first cover.

Apparently sulfur can also be helpful. I don't particularly want to spray copper, since I'm concerned about it getting on the other edible plants around and building up in the soil. There is a product called Serenade which is based on soil bacteriums which sounds promising, is listed as compatible with organic methods, and is low toxicity to humans (can be sprayed even on the day of harvest).

The best method for control of cedar apple rust is to remove all cedar and juniper trees for a few miles around. Ha. That radius is bigger than my whole city. My next door neighbor has a nice big cedar tree in his back yard, maybe 10 meters from these apples.

So this coming season I'll try the holistic spray regimen, along with plenty of water and care. Perhaps the additional air circulation and sunlight would have helped with no sunflowers this year, but they were not big enough to be a factor during the spring infection window. They may however have encouraged the fungus to grow more extensively during the season.

I am not planning on letting the trees make fruit for another year or two even if they want to, so I've got more leeway to experiment. If the trees are still suffering from CAR in a year or two maybe I'll experiment with sulfur or Serenade.


Borers - none yet
I tried to keep an eye out for evidence of apple borers, but didn't see any. From what I read, this is the worst possible thing to hit the trees, so if I can catch them early and kill them in their hole it might not kill the tree. I'll keep my fingers crossed.


Orchard care
After planting, I pruned with an eye towards my future espalier design. After watching how things developed I would do it a little differently now. The trellis was put up, and in late summer I applied a little patch of peastone mulch around each tree, as recommended by Michael Philips but scaled down to micro tree and orchard size.

Gearing up for the end of season holistic orchard spray, I ordered a backpack sprayer from Sprayer Depot, and the ingredients from Amazon. I mixed up a half tank of the stuff to spray on the trees at the end of last season. Whew, pretty strong odor! Liquid fish and neem oil are both pretty powerful on their own, much less mixed together. Well, the trees only used like 100ml of the spray, so I ran around the garden spraying other woody perennials and soil with the remainder. I've got enough ingredients to last me like 10 years at this rate. Probably I'll make up 1/4 tanks from now on, until the trees get a lot bigger.


I tried to work out the holistic spray recipe by volume, then translated to %, then to ml, then rounded to the nearest cup measure. Here is what I ended up with:
I filled the warm water inside, added a dash of soap, then took the sprayer out in the dooryard to add the other goodies. I used a 1/4 cup measure, just filling half full with neem and using two measures for fish.

The whole bed was frosted with some woody compost from Landscape Express, with some help from Child 2 and Child 3.


I worry about giving the trees too much nitrogen, leading to too much vegetative growth in a season, opening the door to disease and pests. But you know, a person can only do so much worrying about 7 tiny apple trees.


Finally, I spread some salt marsh hay over the beds and put corrugated trunk guards on the trees.


Not sure that was worthwhile though since I don't know that we have mice living under snow cover in Somerville. The three trees destined for angled branches have very little run of trunk up from the ground, so it's not clear the guard is going to do much anyway. And it looked like it would be easy to damage tender bark with the sharp edges of the tree guards. Maybe next year I'll use spiral guards instead. In any case, we now have plenty of snow; it is up above the first wire of the trellis now. I wonder if there are mice or voles in there?


For some reason, the Gold Rush and Sweet Sixteen held onto some leaves all the way into February, even through bitter cold and blizzards. That seems weird to me; maybe a sign of some kind of problem or tree health issue?